Protection Guide

This guide explains the safety standards and materials used in motorcycle riding gear, and how to choose gear for the way you ride. It is general information. Each RSTA product page shows a CE class or level only where a test certificate backs it. If a page does not show one, we make no such claim for that product.

What the standards mean

Riding gear in Europe and many other markets is tested against European (EN) standards. Gear that passes is marked CE. A standard sets test methods and minimum results. It does not make you crash-proof. It tells you how a garment or protector performed in a lab.

Garments: EN 17092

EN 17092 covers riding jackets, pants, suits and jeans. It tests abrasion resistance, seam strength and tear or cut resistance. Garments get a class:

ClassMeaningTypical use
AAAHighest level of abrasion, seam and tear performance. Requires impact protectors.Track, sport and fast road riding
AAMedium to high performance. Requires impact protectors.Touring, adventure and everyday riding
ALower performance than AA. Requires impact protectors.Urban and lower-speed riding
BAbrasion-tested garments without required impact protectors.Short, low-speed trips
CProtection for limited areas only, such as impact protectors worn under or with other clothing.Add-on protection

A higher class means the fabric and seams held up better in testing. It does not mean the garment is more comfortable or suits your riding. A class applies to the garment as tested, with the protectors it was tested with.

Impact protectors: EN 1621

Impact protectors (often called armor) absorb force. They are tested by dropping a weight onto them and measuring how much force passes through to what is behind. There are two levels. Level 2 lets through less force than Level 1.

StandardCoversLevels
EN 1621-1Limb protectors: shoulders, elbows, hips, knees and shinsLevel 1 and Level 2
EN 1621-2Back protectorsLevel 1 and Level 2
EN 1621-3Chest protectorsLevel 1 and Level 2

Level 2 protectors are usually thicker or more rigid. Level 1 protectors are usually thinner and more flexible. Both can be right: choose the level that you will actually wear every ride. Coverage area also matters. A larger protector covers more of the joint or spine.

Gloves: EN 13594

EN 13594 covers riding gloves. It tests abrasion, seam strength, cut and impact, and checks that you can still feel and use the controls. Gloves are rated Level 1 or Level 2, with Level 2 the higher performance level.

Boots: EN 13634

EN 13634 covers riding boots. It tests abrasion, impact cut, sole grip and transverse rigidity. Performance levels also reflect how much of the foot and ankle the boot protects. A taller boot with ankle protection is generally rated higher than a short boot.

Materials

MaterialStrengthsTrade-offs
Cowhide leatherVery good abrasion resistance. Used for track and sport gear. Molds to your body over time.Heavier. Warm in hot weather. Needs care if it gets wet.
Kangaroo leather (where offered)Light for its strength, so it can be thin and flexible. Common in gloves and suits.Usually costs more.
TextileLight, flexible and easy to care for. Works well with removable liners.Abrasion resistance depends on the weave and layers. It varies widely.
MeshBest airflow for hot weather.Offers little wind or rain protection. Rely on the garment's tested class.
Denim (riding jeans)Looks like normal jeans. Good for daily and urban riding.Only reinforced or lined riding denim gives real abrasion protection. Plain denim does not.
Waterproof membraneA thin layer inside the garment that blocks rain but lets some vapor out.Adds cost and some warmth. It works best with a clean outer fabric and good seams.

How to choose by riding style

  • Racing and track days: look for leather, close fit and the highest garment class shown on the product page. Choose Level 2 protectors where offered, and add a back protector.
  • Street and commuting: a jacket and pants or riding jeans you will wear every day. Check that protectors sit at the shoulders, elbows, hips and knees. Add a back protector.
  • Touring: gear for long days and changing weather. Look for a waterproof membrane, vents, and room for layers. A comfortable fit matters when you ride for hours.
  • Adventure: gear for mixed roads and trails. Look for durable fabric, vents and removable liners, plus good coverage at the knees and elbows.
  • All styles: add gloves and boots. Hands and feet are often hurt first.

Fit and care

  • Fit. A protector only works if it stays over the joint in a crash. If your gear is loose, the armor can move away. This is one reason we offer made to measure.
  • Replace after a crash. Protectors and garments can be damaged in ways you cannot see. Replace protective gear that has been in a crash.
  • Check regularly. Look at seams, zips and protectors for wear. Replace what is worn.

Our CE claims

We state a CE class or level on a product only when a test certificate supports it, and only for what that certificate covers. If you need a specific class or level, check the product page, or ask us before you order. For sizing help, see the size guide.